Elevex Guide: Optimal Maintenance for your Forklift
The Importance of Cleaning
Just as your car requires cleaning when it gets dirty, the same goes for the forklift. The cleaning method will depend on your forklift’s power type. For an electric forklift, using a broom to remove accumulated dust and utilizing an air compressor or biodegradable, non-toxic cleaning solutions are recommended. Be cautious with water, which could affect the electrical components, and be careful to avoid any electrical damage.
According to the Linde Service Guide, “the use of steam cleaning or strong degreasing agents should be carried out with caution, as they can remove the grease from life-lubricated bearings, causing irreversible damage. Once the grease is removed, it’s not possible to relubricate the bearings.”
For non-electric forklifts, using a pressure washer is advised for removing stubborn dirt. This method also allows maintaining a safe distance during cleaning, protecting the operator from dangerous projections.
The Linde operator manual also specifies that “cleaning with water jet (high pressure or steam) should not be directly applied to areas of the front axle, electrical or electronic components, connectors, or insulating materials. Water should not be used to clean the central electrical system or control console.”
Do not Neglect the Underside
Cleaning from Top to Bottom
For particularly dirty areas, soaking your forklift might be necessary. This will help soften the accumulated dirt, making it easier to clean. Always start from the top and work your way down, allowing the dirt to flow naturally, thus avoiding the need to clean the same areas again.
Allow Adequate Drying Time
Protect Yourself
Regardless of the cleaning method chosen, it is essential to wear protective equipment. Using cleaning products or tools can project harmful substances. Wear goggles, boots, protective gloves, as well as long sleeves and pants to protect your skin.
If you encounter difficulties while cleaning your forklift, our maintenance and service team is always available to assist you.
By following these steps, you ensure that your forklift remains in optimal condition, extending its life and maintaining its performance at the highest level.
You may also be interested by
Elevex guide: are your operators up to the job?
To ensure safe and efficient operation of materials handling equipment it is essential that the right personnel be selected to operate and maintain it and are thoroughly trained in their duties. In many cases, materials handling equipment is as valuable as a luxury car and should be handled as such. Operators should be encouraged to adopt a culture of respect and treat equipment as if it were their own, taking responsibility for any costs caused by damage or misuse.
Read more
Elevex guide: monitoring your forklift tires for optimum performance
Super Elastic Tires (sometimes referred to as Solid Tires).
As part of your daily forklift checks, tires are an important component to consider and should be regularly checked for signs of wear and tear. Some key areas to consider are the surface tread areas, the sidewalls, and the point at which the tire fits to the wheel. Always aim to replace your tires before they are worn to the J-Line (the wear line indicator on all Super Elastic Tires) as the tire will degrade rapidly once on and beyond the J-Line.
Comprehensive Guide to Spring Forklift Maintenance
Spring ushers a season of renewal and rejuvenation, making it the ideal time for companies to focus on maintaining and inspecting their forklift fleets. With the arrival of warmer weather and the potential for operational challenges caused by seasonal shifts and temperature fluctuations, ensuring the functionality and reliability of your forklifts is paramount. Elevex’s meticulously crafted guide serves as an indispensable resource for conducting a thorough spring maintenance check-up, essential for fostering a safe, efficient, and productive workplace.
Read more